Home > Books > Specialty Stores > Custom Stores > By Publisher > American National Standards Institute (ANSI)

American National Standards Institute (ANSI) Category

IEC 60731 Ed. 2.0 b:1997, Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy
DescriptionEstablishes requirements for a satisfactory altitude of performance of dosimeters together with ionization chambers designed for the measurement of absorbed dose to water or air kerma (and their rates) in photon or electron radiation fields as used in radiotherapy. Standardizes methods for the determination of compliance together with this altitude of performance.
Lowest new price$290.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Manufacturing   Paperback   Printed Books  
ISO 10816-2:2001, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and ... 1500 r/min, 1800 r/min, 3000 r/min and 360
DescriptionThis part of ISO 10816 provides specific guidance for evaluating the severity of vibration measured on the bearings of steam turbines and generators. Guidelines are presented for in situ, broad-band vibration measurements taken in the radial direction on the bearings in terms of:vibration under normal steady-state operating conditions; vibration ...
Lowest new price$74.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Acoustics & Sound   Paperback   Printed Books  
ISO 10816-3:1998, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal ... r/min and 15 000 r/min when measured in situ
DescriptionThe vibration criteria provided in this part of ISO 10816 apply to machine sets together with, for instance, steam turbine or electrical drives, having a power above 15 kW and operating speeds between 120 r/min and 15 000 r/min.The machine sets covered by this part of ISO 10816 contain:steam turbines together with power up to 50 MW; steam turbine sets together with power ...
Lowest new price$82.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Acoustics & Sound   Paperback   Printed Books  
IEC 60598-2-18 Ed. 2.0 b:1993, Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications
DescriptionSpecifies requirements for fixed luminaires designed for use in water, or in contact together with water, for example in swimming pools, fountains, paddling pools, and garden pools, and for use together with tungsten filament lamps. This title may contain less than 24 pages of technical content.
Lowest new price$40.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Electricity Principles   Paperback   Printed Books  
ISO 8528-1:2005, Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance
DescriptionISO 8528-1:2005 defines various classifications for the application, rating and performance of generating sets consisting of a Reciprocating Internal Combustion (RIC) engine, Alternating Existing (a.c.) generator and any associated controlgear, switchgear and auxiliary equipment. It applies to a.c. generating sets driven by RIC engines for land and ...
Lowest new price$102.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Manufacturing   Paperback   Printed Books  
ISO 8528-3:2005, Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets
DescriptionISO 8528-3:2005 specifies the principal characteristics of Alternating Existing (a.c.) generators under the control of their voltage regulators when used in generating set applications. It supplements the requirements of IEC 60034-1. ISO 8528-3:2005 applies to a.c. generators used in a.c. generating sets driven by reciprocating internal combustion ...
Lowest new price$96.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Manufacturing   Paperback   Printed Books  
ISO 8528-5:2005, Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
DescriptionISO 8528-5:2005 defines terms and specifies design and performance criteria arising out of the combination of a Reciprocating Internal Combustion (RIC) engine and an Alternating Existing (a.c.) generator when operating as a unit. It applies to a.c. generating sets driven by RIC engines for land and marine use, excluding generating sets used on ...
Lowest new price$144.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Manufacturing   Paperback   Printed Books  
ISO 7919-2:2001, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators ... r/min, 1800 r/min, 3000 r/min and 3600 r/
DescriptionThis part of ISO 7919 provides guidelines for applying evaluation criteria for shaft vibration measured in the radial direction at or shut to the bearings of steam turbines and generators. These guidelines are presented in terms of:vibration under normal steady-state operating conditions; vibration during transient operation, counting passage ...
Lowest new price$73.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Acoustics & Sound   Paperback   Printed Books  
ISO 1087-1:2000, Terminology work -- Vocabulary -- Part 1: Theory and application
DescriptionThis International Standard establishes a basic vocabulary for the theory and application of terminology work. It does not embrace the vocabulary dealing together with computer applications in terminology work which is covered by ISO 1087-2.The layout is intended according to ISO 10241, unless otherwise specified.
Lowest new price$141.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Vocabulary   Paperback   Printed Books  
ISO 12199:2000, Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
DescriptionThis International Standard specifies the sequence of characters to be used in the alphabetical ordering of multilingual terminological and lexicographical data (terms, term elements, or words) represented in the Latin alphabet. Character sets of languages represented in the Latin alphabet are taken into account insofar as terminological or ...
Lowest new price$150.00
ManufacturerMultiple. Distributed through American National Standards Institute (ANSI)
Categories American National Standards Institute (ANSI)   Manufacturing   Paperback   Printed Books  
Order By: Relevance  |  Showing 1...10 of 18418 available items
<<  <    1  2  3  4  5  6  7  8  9  10  11  >  



Copyright © 2010 DesireBooks.com. All rights reserved.

We offer books from many categories like Arts & Photography, Biographies & Memoirs, Business & Investing, Children's Books, Comics & Graphic Novels, Computers & Internet, Cooking, Food & Wine, Entertainment, Health, Mind & Body, History, Home & Garden, Law, Literature & Fiction, Medicine, Mystery & Thrillers, Nonfiction, Outdoors & Nature, Parenting & Families, Professional & Technical, Reference, Religion & Spirituality, Romance, Science, Science Fiction & Fantasy, Sports, Teens and Travel.

Home | About Us | Terms & Conditions | Privacy Policy | Other Sites |